Tutorial Videos

Categories
Videos: 1718
4:08
How to crochet a double crochet (dc) US / treble (tr) UK

In this DROPS video we show how to crochet a double crochet (US) / treble crochet (UK). You crochet a double crochet / treble crochet as follows: Wrap the yarn round the crochet hook and insert the hook in next stitch. Wrap the yarn round the hook and pull the yarn through the stitch only, leaving 3 loops on your hook. Wrap the yarn round the hook again and pull through the first 2 loops only. Wrap the yarn round the hook again and pull through the last 2 loops. You must read the pattern to be able to follow. You’ll find patterns where this technique is used by clicking on the pictures below.
8:14
How to crochet squares together with chain stitches and double crochet

In this DROPS video we show how you can crochet squares together with chain stitches and double crochet. Lay 2 squares together, wrong side to wrong side, and work through both layers like this: 1 double crochet around the chain stitches in the corner, * 4 chain stitches, skip 3 treble crochets (= treble crochet groups) and crochet 1 double crochet between 2 treble crochets groups, *, work from *-* up to and including the next corner, work 1 chain stitch (transition to the next 2 squares), work 1 double crochet around the corner on the next square. Work from *-* until the row has been worked together. Cut the strand, then work the squares together in width in the same way. We use the yarn DROPS Paris in the video. This technique is used in several patterns - you can find patterns by clicking on the pictures below:
6:35
How to knit up stitches for the neck to a jumper with European shoulder

In this DROPS video we show how to knit up stitches around the neck to a jumper with a European shoulder, using a knitting needle or a crochet hook. Then follow the description in the pattern. There are many different ways to work a rib (e.g knit 1 / purl 1, knit 2 / purl 2, knit 1 twisted / 1 purl etc.). And you can work a single neck, double neck or a high neck. In this video we work a double neck with a rib worked like this: knit 2, purl 2, cast off with knit over knit and purl over purl and then fold the neck double to the inside and fasten down. In this video we work with 2 yarn qualities: DROPS Lima colour no. 9029 sage green and DROPS Kid-Silk colour no. 45 soft mint, needle size 5 mm. You must read a pattern to be able to follow this video properly. You’ll find patterns by clicking on the pictures below.
5:17
How to work German Short Rows – with a double stitch back and forth on the needle

German short rows = The work is turned in the middle of a row. When working short rows, there will be a small hole - this can be closed by tightening the thread or using the German short row technique. Row 1 (= right side): Knit until where the piece is to be turned, turn, when it is knitted further there will be a small hole at the turn - this hole can be closed like this: Row 2 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch (with a stitch and a thread). Purl until where the work is to be turned. Turn the work. Row 3 (= right side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before knitting the next stitch = the first stitch on the right needle has now become a double stitch. Knit until the double stitch from the previous row and knit the double stitch so that the thread that was placed over the needle and the stitch is knitted together = 1 stitch. Knit until where the work is to be turned. Turn the work. Row 4 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch. Purl until the double stitch from the previous row and purl the double stitch so that the thread that was placed over the needle and the stitch is purled together = 1 stitch. Purl until where the work is to be turned. Turn the work. Repeat 3rd and 4th row. We use the yarn DROPS Snow in the video. This technique is used in several patterns - you can find patterns by clicking on the pictures below:
8:41
How to work German Short Rows – with a double stitch round on the needle

German short rows = The work is turned in the middle of a row. When working short rows, there will be a small hole - this can be closed by tightening the thread or using the German short row technique. Row 1 (= right side): Knit until where the piece is to be turned, turn, when it is knitted further there will be a small hole at the turn - this hole can be closed like this: Row 2 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch (with a stitch and a thread). Purl until where the work is to be turned. Turn the work. Row 3 (= right side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before knitting the next stitch = the first stitch on the right needle has now become a double stitch. Knit until the double stitch from the previous row and knit the double stitch so that the thread that was placed over the needle and the stitch is knitted together = 1 stitch. Knit until where the work is to be turned. Turn the work. Row 4 (= wrong side): Slip the 1st stitch from the left needle as if to purl, have the thread at the front towards you, place the thread over the right needle and tighten the thread well before purling the next stitch = the first stitch on the right needle has now become a double stitch. Purl until the double stitch from the previous row and purl the double stitch so that the thread that was placed over the needle and the stitch is purled together = 1 stitch. Purl until where the work is to be turned. Turn the work. Repeat 3rd and 4th row. We use the yarn DROPS Snow in the video. This technique can be used in many patterns; you’ll find pattern by clicking on the pictures under:
3:42
How to work an I-cord edge, back and forth

In this DROPS video we show how to work an I-cord edge both from the right side and from the wrong side. In this video the 6 first / 6 last stitches after the I-cord edge are worked in garter stitches (= the stitches are knitted on every row). At the beginning of the row from the right side, work like this: Slip 1 stitch purl-wise with strand in front, knit 1, work 6 garter stitches. Work stockinette stitch. At the end of the row from the right side, work like this: Work 6 garter stitches, slip 1 stitch purl-wise with strand in front, knit 1. At the beginning of the row from the wrong side, work like this: Slip 1 stitch purl-wise with strand in front, knit 1, work 6 garter stitches. Work stockinette stitch. At the end of the row from the wrong side, work like this: Work 6 garter stitches, slip 1 stitch purl-wise with strand in front, knit 1. We use the yarn DROPS Snow in the video. This technique is used in several patterns - you can find patterns by clicking on the pictures below:
6:10
How to start knitting for a beginner

In this DROPS video we show you everything from cast on, knit your stitches back and forth, and to end your piece with bind off. Mastering these techniques is the start of many exciting projects as your first dish cloth, potholder or headband... When knitting all sts on every row, it's called garter stitch. The fabric looks the same on both sides, perfect for scarfs!
2:40
How to cast on with the continental method

There are different methods to cast on. In this DROPS video we show one of the most common methods that gives a firm but still elastic edge. It’s called the continental method. The cast on should be firm but not too hard. If you feel it becomes too tight you can use larger needles or cast on around two needles and then pull one needle out afterwards. Remember to use the correct needles when starting your knitting. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:16
How to cast on with loops

In this DROPS video we show how you can cast on your work with loops. This is a simple cast on alternative that is easy for beginners. This is also how we cast on new sts at the side of the work e.g. when we are knitting a front piece and sleeves in one, and cast on new sts each side for the sleeves. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:07
How to work a knit (K) stitch (Continental method)

In this DROPS video we show how to knit a knit (K) stitch according to the Continental method. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:07
How to work a knit stitch (US/UK method)

Time to knit! In this DROPS video we show how to work a knit stitch (K). We are knitting using the US / UK method. This means we are holding the yarn in our right hand and wrap it around the needle with our right hand. You must read the pattern to be able to follow. You’ll find patterns where this technique is used by clicking on the pictures below.
2:04
How to work a purl (P) stitch ( Norwegian method)

In this DROPS video we show how to work a purl (P) stitch the Norwegian way. This is an old traditional way to purl, commonly used in Norway, but also used in other Scandinavian countries. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
7:38
How to knit Fair Isle (2 color knitting) continental

In this DROPS video we show how you can knit Fair Isle (2 colour knitting) using the continental method. In this video we are following a chart back and forth on needles, knitting with two colors. The color that not is knitted is following behind the work when knitting RS rows. Make sure it's not too tight or too loose. If more than 3 sts in a row of one of the colors, then twist the yarns for every 3 sts, by picking up the working yarn alternately above and under the yarn following on the back. When working WS rows have the yarn following in front of work, again make sure you have the right tension on the thread. Note - if a color not is used all the way at the end of the row, you can drop it, but if it will be used at the beginning of the next row, then keep carry it a long by twisting around the working yarn. Don't worry if it's a bit uneven, it will even out a lot when blocking. You must read the pattern to be able to follow. You’ll find patterns where this technique is used by clicking on the pictures below.
6:46
How to knit Fair Isle (2 color knitting) US/UK

In this DROPS video we show how you can knit Fair Isle (2 colour knitting) using the US/UK method. In this video we are following a chart back and forth on needles, knitting with two colors. The color that not is knitted is following behind the work when knitting RS rows. Make sure it's not too tight or too loose. If more than 3 sts in a row of one of the colors, then twist the yarns for every 3 sts. When working WS rows have the yarn following in front of work, again make sure you have the right tension on the thread. Note - if a color not is used all the way at the end of the row, you can drop it, but if it will be used at the beginning of the next row, then keep carry it a long by twisting around the working yarn. Don't worry if it's a bit uneven, it will even out a lot when blocking. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:49
How to work a purl (P) stitch (Continental method)

In this DROPS video we show how to knit a purl (P) stitch using the Continental method. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:13
How to work a purl (P) stitch (US/UK method)

In this DROPS video we show how to work a purl (P) stitch. We are knitting purl stitches according to the English method. This makes exactly the same stitch, but we do this holding the working yarn in our right hand. Lay the yarn around the needle with the right hand. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:29
How to knit stockinette/stocking stitch

In this DROPS video we show how you can knit stockinette (stocking) stitch. Stockinette is the most common technique to create an even surface on the outside of your garment. Work back and forth on the needles as we do in this video, you knit all sts on all rows from right side. On the wrong side rows you purl all stitches. When working in the round on circular needles or sock needles, you knit all sts on every round. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:19
How to knit stockinette stitch in the round on a circular needle

In this DROPS video we show how you can knit stockinette stitch in the round on circular needles. Cast on, join and work stockinette in the round on a circular needle. Make sure 1st row not gets twisted, knit all sts around and around. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:08
How to knit stockinette stitch back and forth on a circular needle

In this DROPS video we show how you can knit stockinette stitch back and forth on circular needles. Cast on, turn around and work stockinette back and forth on a circular needle. First row = WS. For stockinette *P 1 row, K 1 row*, repeat *-*. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:49
How to work garter stitch back and forth

In this DROPS video we show how you can work garter stitch back and forth on the needle using the continental method. When working garter stitch back and forth on needle you knit the stitches on every row. When working garter in the round on a circular needle or sock needles you will have to knit one round, then purl one round, and then repeat these two rounds alternating. Note! When working in garter st your gauge i.e number of rows in height, will increase compared to working in stockinette. You must read the pattern to be able to follow. You’ll find patterns where this technique is used by clicking on the pictures below.
1:58
How to knit garter stitch in the round on circular needles

In this DROPS video we show how you can knit garter stitch in the round on a circular needle. Purl one round, knit one round, purl one round and then knit one. Repeat this for garter stitch. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
2:05
How to increase with a yarn over (yo)

In this DROPS video we show how you can increase with yarn over (yo) This is an increase that creates a decorative hole. We show the increase 2 times in the video. Halfway through the video we have turned the work and show you how to work the yo in front or back loop depending if you prefer a larger or smaller hole. When working the back loop the stitch becomes twisted and this way the hole becomes a bit smaller. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:17
How to decrease: slip, knit, pass (SKP)

In this DROPS video we show how you decrease 1 stitch on the RS using SKP (slip 1 stitch, knit next stitch and pass slipped stitch over). You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.
1:46
How to bind off from the right side (RS)

In this DROPS video we show how you can bind off your work from the right side. You bind off to lock stitches that no longer will be worked to stop them from running. You also bind off stitches to shape arm holes, neck and shoulders. The bind off should neither be too firm or too hard, e.g. you need to be able to get the sweater over your head. To prevent binding off to firm you can use a larger needle then what you have used during your knitting. Binding off with knit stitches, you knit the stitches and then keep passing the next to last knitted stitch over the last knitted stitch. When 1 stitch remains, cut the thread, and pull yarn through last stitch. You must read the pattern to be able to follow. You’ll find patterns where you can use this technique by clicking on the pictures below.