DROPS Brushed Alpaca Silk uni colour 77% Alpaca, 23% Silk |
3.95 $ /25g |
Order |
Clicking the ORDER button will redirect you to Wool Warehouse Direct Ltd website
Arched (white) No. 522
OrderClicking the ORDER button will redirect you to Wool Warehouse Direct Ltd website
Clicking the ORDER button will redirect you to Wool Warehouse Direct Ltd website
The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!
Change language:
English (US/in)#summerstream
DROPS design: Pattern no as-060
-------------------------------------------------------
Alternative Yarn – See how to change yarns here
Yarn Groups A to F – Use the same pattern and change the yarn here
Yarn usage using an alternative yarn – Use our yarn converter here
-------------------------------------------------------
DROPS Brushed Alpaca Silk uni colour 77% Alpaca, 23% Silk 3.95 $ /25g Order |
Clicking the ORDER button will redirect you to Wool Warehouse Direct Ltd website
Arched (white) No. 522
OrderClicking the ORDER button will redirect you to Wool Warehouse Direct Ltd website
Clicking the ORDER button will redirect you to Wool Warehouse Direct Ltd website
The yarn cost is calculated from the pattern’s smallest size and the yarn’s cheapest product type. Looking for an even better price? You might find it on the DROPS Deals!
All measurements in charts are in cm.
= K from RS, P from WS | |
= 1 YO between 2 sts On next row P the YOs. They should make holes. | |
= K 2 tog | |
= slip 1 st as if to K, K 1, psso | |
= slip 1 st as if to K, K 2 tog, psso |
Each of our patterns has specific tutorial videos to help you.
These step-by-step tutorials might also help you:
Why is the knitting/crochet tension so important?
Knitting tension is what determines the final measurements of your work, and is usually measured per 10 x 10 cm. It is provided like so: number of stitches in width x number of rows in height - eg: 19 stitches x 26 rows = 10 x 10 cm.
The knitting tension is very individual; some people knit/crochet loosely while others work tightly. You adjust the knitting tension with the needle size, which is why the suggested needle size only serve as a guide! You need to adjust this (up or down) to ensure that YOUR knitting tension matches the knitting tension provided in the pattern. If you work with a different knitting tension than provided you will have a different yarn consumption, and your work will have different measurements than what the pattern suggests.
The knitting tension also determines which yarns can replace each other. As long as you achieve the same knitting tension you can replace one yarn with another.
See DROPS lesson: How to measure your tension/gauge
See DROPS video: How to make a gauge tension swatch
How do I know how many balls of yarn I need?
The required amount of yarn is provided in grams, eg: 450 g. To calculate how many balls you’ll need you first need to know how many grams are in 1 ball (25g, 50g or 100g). This information is available if you click on the individual yarn quality on our pages. Divide the amount required with the amount of each ball. For example, if each ball is 50g (the most common amount), the calculation will be as follows: 450 / 50 = 9 balls.
Can I use a different yarn than what the pattern suggests?
The important thing when changing from one yarn to another is that the knitting/crochet tension remains the same. This is so that the measurements of the finished piece will be the same as on the sketch provided. It is easier to achieve the same knitting tension using yarns from the same yarn group. It is also possible to work with multiple strands of a thinner yarn to achieve the knitting tension of a thicker one. Please try our yarn converter. We recommend you to always work a test swatch.
Please NOTE: when changing yarn the garment might have a different look and feel to the garment in the photo, due to individual properties and qualities of each yarn.
See DROPS lesson: Can I use a different yarn than the one mentioned in the pattern?
What are the yarn groups?
All our yarns are categorised into yarn groups (from A to F) according to thickness and knitting tension – group A contains the thinnest yarns and group F the thickest. This makes it easier for you to find alternative yarns to our patterns, should you wish to switch yarn. All yarns within the same group have a similar knitting tension and can easily replace each other. However, different yarn qualities have different structures and properties which will give the finished work a unique look and feel.
How do I use the yarn converter?
At the top of all our patterns you’ll find a link to our yarn converter, which is a helpful tool should you wish to use a different yarn than suggested. By filling in the yarn quality you wish to replace, the amount (in your size) and number of strands, the converter will present good alternative yarns with the same knitting tension. Additionally it will tell you how much you’ll require in the new qualities and whether you’ll need to work with multiple strands. Most skeins are 50g (some are 25g or 100g).
If the pattern is worked with multiple colours, every colour will have to be converted separately. Similarly, if the pattern is worked with several strands of different yarns (for example 1 strand Alpaca and 1 strand Kid-Silk) you will have to find alternatives for each, individually.
Why do you show discontinued yarns in the patterns?
Since different yarns have different qualities and textures we have chosen to keep the original yarn in our patterns. However, you can easily find options among our available qualities by using our yarn converter, or simply pick a yarn from the same yarn group.
It is possible that some retailers still have discontinued yarns in stock, or that someone has a few skeins at home that they would like to find patterns for.
The yarn converter will provide both alternative yarn as well as required amount in the new quality.
What size should I knit?
If you think it's hard to decide what size to make, it can be a good idea to measure a garment you own already and like the size of. Then you can pick the size by comparing those measures with the ones available in the pattern's size chart.
You'll find the size chart at the bottom of the pattern.
See DROPS lesson: How to read size chart
Why do I get the wrong knitting tension with the suggested needle size?
The needle size provided in the pattern serves only as a guide, the important thing is to follow the knitting tension. And since knitting tension is very individual, you will have to adjust the needle size to ensure that YOUR tension is the same as in the pattern – maybe you’ll have to adjust 1, or even 2 needle sizes, up or down to achieve the correct tension. For this, we recommend that you work test swatches.
Should you work with a different knitting tension than the one provided, the measurements of the finished garment might deviate from the measurement sketch.
See DROPS lesson: How to measure your tension/gauge
See DROPS video: How to make a gauge tension swatch
Why is the pattern worked top-down?
Working a garment top-down provides more flexibility and room for personal adjustment. For example it is easier to try the garment on while working, as well as making adjustments to length of yoke and shoulder caps.
The instructions are carefully explaining every step, in the correct order. Diagrams are adjusted to the knitting direction and are worked as usual.
How do I work according to a knitting diagram?
The diagram depicts all rows/rounds, and every stitch seen from the right side. It is read from bottom to top, from right to left. 1 square = 1 stitch.
When working back and forth, every other row is worked from the right side and every other row is worked from the wrong side. When working from the wrong side, the diagram will have to be worked reversed: from left to right, knit stitches are purled, purl stitches are knit etc.
When working in the round every round is worked from the right side and the diagram are worked from right to left on all rounds.
See DROPS lesson: How to read knitting diagrams
How do I work according to a crochet diagram?
The diagram depicts all rows/rounds, and every stitch seen from the right side. It is worked from bottom to top, from right to left.
When working back and forth every other row is worked from the right side: from right to left and every other row is worked from the wrong side: from left to right.
When working in the round, every row in the diagram are worked from the right side, from right to left.
When working a circular diagram you start in the middle and work your way outwards, counter clockwise, row by row.
The rows usually start with a given number of chain stitches (equivalent to the height of the following stitch), this will either be depicted in the diagram or explained in the pattern.
See DROPS lesson: How to read crochet diagrams
How do I work several diagrams simultaneously on the same row/round?
Instructions for working several diagrams after each other on the same row/round, will often be written like so: “work A.1, A.2, A.3 a total of 0-0-2-3-4 times". This means you work A.1 once, then A.2 is worked once, and A.3 is repeated (in width) the number of times provided for your size – in this case like so: S = 0 times, M = 0 times, L=2 times, XL= 3 times and XXL = 4 times.
The diagrams are worked as usual: begin with the first row in A.1, then work the first row in A.2 etc.
See DROPS lesson: How to read knitting diagrams
See DROPS lesson: How to read crochet diagrams
Why are the sleeves shorter in larger sizes?
The total width of the garment (from wrist-to-wrist) will be larger in the larger sizes, despite the actual sleeves being shorter. The larger sizes have longer sleeve caps and wider shoulders, so there will be a good fit in all sizes.
Where on the garment is the length measured?
The measurement sketch/schematic drawing provides information regarding the full length of the garment. If it’s a jumper or a jacket the length is measured from the highest point on the shoulder (usually closest to the neckline), and straight down to the bottom of the garment. It is NOT measured from the tip of shoulder. Similarly, the length of yoke is measured from the highest point on the shoulder and down to where yoke is split into body and sleeves.
See DROPS lesson: How to read a schematic drawing
What is a repeat?
Diagrams are often repeated on the round or in height. 1 repeat is the diagram the way it appears in the pattern. If it says to work 5 repeats of A.1 in the round, then you work A.1 a total of 5 times after/next to each other in the round. If it says to work 2 repeats of A.1 vertically/in height you work the entire diagram once, then begin again at the start and work the entire diagram one more time.
Why does the piece start with more chain stitches than it’s worked with?
Chain stitches are slightly narrower than other stitches and to avoid working the cast-on edge too tight, we simply chain more stitches to begin with. The stitch count will be adjusted on the following row to fit the pattern and measurement sketch.
Why increase before the rib edge when the piece is worked top-down?
The rib edge is more elastic and will contract slightly compared to, for example, stocking stitch. By increasing before the rib edge, you avoid a visible difference in width between the rib edge and the rest of the body.
Why increase in the cast-off edge?
It’s very easy to cast off too tightly, and by making yarn overs while casting off (and simultaneously casting these off) you avoid a too tight cast off edge.
See DROPS video: How to bind off with yarn overs (yo)
How do I increase/decrease on every 3rd and 4th row/round alternately?
To achieve an even increase (or decrease) you can increase on, for example: every 3rd and 4th row alternately, like so: work 2 rows and increase on the 3rd row, work 3 rows and increase on the 4th. Repeat this until the increase is complete.
See DROPS lesson: Increase or decrease 1 st on every 3rd and 4th row alternately
How can I work a jacket in the round instead of back and forth?
Should you prefer to work in the round instead of back and forth, you may of course adjust the pattern. You’ll need to add steeks mid-front (usually 5 stitches), and follow the instructions. When you would normally turn and work from the wrong side, simply work across the steek and continue in the round. At the end you’ll cut the piece open, pick up stitches to work bands, and cover the cut edges.
See DROPS video: How to knit steeks and cut open
Can I work a jumper back and forth instead of in the round?
Should you prefer to work back and forth instead of in the round, you may of course adjust the pattern so you work the pieces separately and then assemble them at the end. Divide the stitches for the body in 2, add 1 edge stitch in each side (for sewing) and work the front and back pieces separately.
See DROPS lesson: Can I adapt a pattern for circular needles into straight needles?
Why is the pattern slightly different than what I see in the photo?
Pattern repeats can vary slightly in the different sizes, in order to get the correct proportions. If you’re not working the exact same size as the garment in the photo, yours might deviate slightly. This has been carefully developed and adjusted so that the complete impression of the garment is the same in all sizes.
Make sure to follow instructions and diagrams for your size!
How do I make a women’s size garment into a men’s size one?
If you have found a pattern you like which is available in women’s size it’s not very difficult to convert it to men’s size. The biggest difference will be the length of sleeves and body. Start working on the women size that you think would fit across the chest. The additional length will be worked right before you cast off for the armhole/sleeve cap. If the pattern is worked top-down you can add the length right after the armhole or before the first decrease on sleeve.
Regarding additional yarn amount, this will depend on how much length you add, but it is better with a skein too many than too few.
How do I prevent a hairy garment from shedding?
All yarns will have excess fibres (from production) that might come off as lint or shedding. Brushed yarns (ie hairier yarns) have more of these loose, excess fibres, causing more shedding.
Shedding also depends on what is worn under or over the garment, and whether this pulls at the yarn fibres. It’s therefore not possible to guarantee that there will be no shedding
Below are some tips on how to get the best result when working with hairier yarns:
1. When the garment is finished (before you wash it) shake it vigorously so the looser hairs come off. NOTE: do NOT use a lint roller, brush or any method that pulls at the yarn.
2. Place the garment in a plastic bag and put it in your freezer - the temperature will cause the fibres to become less attached to each other, and excess fibres will come off easier.
3. Leave in the freezer for a few hours before taking it out and shaking it again.
4. Wash the garment according to the instructions on the yarn label.
Why does my garment pill?
Pilling is a natural process that happens to even the most exclusive of fibers. It's a natural sign of wear and tear that is hard to avoid, and that is most visible in high friction areas of your garment like a sweater's arms and cuffs.
You can make your garment look as new by removing the pilling, using a fabric comb or a pill/lint remover.
Summer Stream |
||||||||||||||||
|
||||||||||||||||
Knitted DROPS poncho in garter st with lace pattern and buttons in the side, worked top down in ”Brushed Alpaca Silk”. Size S- XXXL
DROPS Extra 0-1273 |
||||||||||||||||
GARTER ST (back and forth): K all rows. 1 ridge = K2 rows. PATTERN: See diagrams A.1 to A.3. The diagrams show all rows in pattern seen from RS. INCREASE TIP: Inc 1 st by making 1 YO. On next row round K YOs twisted, i.e. work in the back loop of st instead of front to avoid holes. BUTTONHOLES: Dec for buttonholes on right band. Since the garment is worked top down dec at end of needle from RS. 1 buttonhole = K tog third and fourth st from edge and make 1 YO. Dec for buttonholes when piece measures: SIZE S/M: 1, 8 and 17 cm / ½, 3 and 6 3/4" SIZE L/XL: 1, 8 and 17 cm / ½, 3 and 6 3/4" SIZE XXL: 1, 9 and 19 cm / ½, 3½ and 7½" SIZE XXXL: 1, 9 and 19 cm / ½, 3½ and 7½" ---------------------------------------------------------- PONCHO: Worked back and forth on circular needle, top down. Loosely cast on 144-151-158-161 sts with Brushed Alpaca Silk on circular needle size 5 mm / US 8. Work 2 ridges in GARTER ST - see explanation above and inc 27-32-37-40 sts evenly on last row from RS (but not over the outermost 4 sts in each side) - READ INCREASE TIP! There are now 171-183-195-201 sts on needle. REMEMBER BUTTONHOLES! On next row work as follows (= RS): 4 band sts in garter st, A.1 (= 6 sts) until 5 sts remain (= 27-29-31-32 times), 1 st in stockinette st, 4 band sts in garter st. REMEMBER THE KNITTING GAUGE When A.1 has been worked 1 time vertically, work ridges for 4-4-5-5 cm / 1½"-1½"-2"-2" and inc 36-36-42-48 sts on last row from RS = 207-219-237-249 sts. Now work A.1 with 4 band sts in garter st in each side (work last st on band in stockinette st). When A.1 has been worked vertically, continue with ridges for 4-4-5-5 cm / 1½"-1½"-2"-2" and inc 36-42-42-42 sts on last row from RS = 243-261-279-291 sts. Now work A.1 with 4 band sts in garter st in each side (work last st on band in stockinette st). When A.1 has been worked vertically, continue with ridges for 4-4-5-5 cm / 1½"-1½"-2"-2" and inc 7-5-3-7 sts on last row from RS = 250-266-282-298 sts. Now work 0-2-0-2 rows in stockinette st with 4 band sts in garter st in each side. Then work pattern as follows: 4 band sts in garter st, A.2 (= 2 sts), A.3 (= 16 sts) 15-16-17-18 times in width, 4 band sts in garter st. When entire diagram has been worked vertically, work 0-2-0-2 rows in stockinette st with 4 band sts in garter st in each side. Then work 2 ridges over all sts. Loosely bind off. Make sure that the bind-off edge is not too tight. ASSEMBLY: Sew the buttons on to the left band. |
||||||||||||||||
Diagram explanations |
||||||||||||||||
|
||||||||||||||||
Have you made this or any other of our designs? Tag your pictures in social media with #dropsdesign so we can see them! Do you need help with this pattern?You'll find tutorial videos, a Comments/Questions area and more by visiting the pattern on garnstudio.com. © 1982-2024 DROPS Design A/S. We reserve all rights. This document, including all its sub-sections, has copyrights. Read more about what you can do with our patterns at the bottom of each pattern on our site. |
With over 40 years in knitting and crochet design, DROPS Design offers one of the most extensive collections of free patterns on the internet - translated to 17 languages. As of today we count 309 catalogs and 11624 patterns - 11615 of which are translated into English (US/in).
We work hard to bring you the best knitting and crochet have to offer, inspiration and advice as well as great quality yarns at incredible prices! Would you like to use our patterns for other than personal use? You can read what you are allowed to do in the Copyright text at the bottom of all our patterns. Happy crafting!
Comments / Questions (17)
Adri Pienaar wrote:
Is it possible to work this pattern in the round doing away with the buttons and bands? The same goes for FIrst date pattern number 154 - 4 Thank you
11.04.2023 - 13:49DROPS Design answered:
Dear Mrs Pienaar, the vents/opening belong to the design, it might be even not wide enough without the opening. But it might also work, you might have to have a try to check if it's okay for you. Happy knitting!
11.04.2023 - 16:49Britt Pettersen wrote:
Skal det på A.1 strikkes 4 omg. rett i tillegg til de to første rillene? Det ser ikke slik ut på bildet?
13.05.2022 - 18:12DROPS Design answered:
Hei Britt. Jo, det skal strikkes 4 pinner med glattstrikk. Om du har mulighet, prøv å forstørre bildet og da ser det det godt. mvh DROPS Design
16.05.2022 - 08:14Rapcsák Károlyné Gabi wrote:
Hello DROPS Design, Elkészítettem a modellt . A vállánál nagyon bő lett. Mit rontottam el? Üdvözlettel Gabi
13.10.2021 - 15:25Kim D'Andrade wrote:
Pattern 0-1273 Brushed Alpaca Silk Cape (15) Light Sea Green How many Balls of Wool do you need for XXL? Please specific for Canada? And How much per Ball?
01.03.2021 - 23:27DROPS Design answered:
Dear Kim, for size XXL, you will need 10 balls of Brushed Alpaca Silk yarn. For other information, please see the yarn's page here. Happy Knitting!
01.03.2021 - 23:53Anna wrote:
Questo modello si può realizzare anche con i ferri diritti? Se sì come devo leggere la legenda dei punti?
18.11.2020 - 17:08DROPS Design answered:
Buonasera Anna, questo modello essendo aperto è lavorato in piano: può seguire le istruzioni lavorando come indicato. Buon lavoro!
18.11.2020 - 22:01Jean Amico wrote:
For size X/XL last section needs 266 stitches. If there are 4 garter stitches on each end that would equal 8 stitches, plus 18 stitches times 16 equals 288 stitches. SoI now have 296 stitches. Why are there 30 extra stitches?
23.08.2020 - 18:02DROPS Design answered:
Hi Jean, You should have 298 stitches when you reach the last section. As you say, 8 band stitches, 18 x 16 = 288, and 2 stitches in A.2 (after the first band). This adds up to 298. Happy knitting!
24.08.2020 - 07:21Kendra L Sheets wrote:
I am working on the Summer Stream pattern. I am doing a size Small and have gotten to the 250 stitches. I have worked the 4 garter stitches, the A.2 sts and the A.3 stitches across the first row but have 3 stitches left. any suggestions? Thank you.
20.03.2020 - 01:04DROPS Design answered:
Hi Kendra, You have 4 x garter stitches on both sides = 8 stitches, 2 stitches in A.2 + (15 x 16 stitches in A.3 = 240 stitches). This all adds up to 250 stitches. Hope this helps and happy knitting!
20.03.2020 - 08:30Ann Bancsi wrote:
Felterne er blanke der skal vise de forskellige mønsterudtagninger?
14.10.2019 - 16:02Nina wrote:
Er nettopp ferdig med denne, men ponchoen ble dessverre helt ubrukelig. Altfor vid oppe. Strikkefasthet stemmer med det som er oppgitt. Hva kan være feil? Ser at det ikke bare er meg som har samme problemet . Lengden ble riktig. Hva kan jeg gjøre?
24.04.2019 - 13:05Marsha Evans wrote:
I noticed while knitting the Summer Stream that the design/pattern on the A2, A3 charts are not centered on the fabric. What could I be doing wrong? I started with A2, then continued across with A3 and ended up with 6 extra stitches at the end.
21.02.2018 - 18:49DROPS Design answered:
Dear Mrs Evans, A.3 should be centered on piece, starting with 4 sts garter st, working A.2 and repeating A.3 to the last 4 sts - make sure you have the correct number of sts before: 250-266-282-298 sts (A.2 will allow to get a symetrical pattern on each side). Happy knitting!
22.02.2018 - 08:31